Water Spot Removal
1 Hour
Removal of all water spots from exterior of vehicle.
Spot Elimination - Do it yourself
Before you start
Chemicals
Glass Sealant - Polish - Car Soap - Glass Cleaner - Rinseless Wash - IPA
Equipment
Polisher - Pressure Washer - Applicator Pads - Lint Free Towels - Microfiber Towels
Step by step
Step 1
Snow foam the car and then rinse it off with a low psi, high gpm pressure washer. This gently removes debris without scratching the surface of the car.
Step 2
Hand wash the car with high gsm microfiber towels to remove remaining dirt. The two bucket wash method reduces the chance of debris scratching your car's paint.
Step 3
Dry water off of the car to prevent water spotting.
Step 4
Use finishing polish on painted surfaces to remove water spots. Finishing polishes are the lightest form of abrasive and only used on spots that remain after the initial wash.
Step 5
Spray IPA solution on paint that is now spotless.
Step 6
Spray affected areas with paint protectant and wipe it down with a few microfiber towels.
Step 7
Use glass polish if water spots are visible on exterior windows.
Step 8
Spray IPA solution on the polished glass and wipe up residue.
Step 9
Apply glass sealant to front windshield in a cross hatch pattern with a lint free towel.
Step 10
Let sealant sit for about 10 minutes
Step 11
Apply second layer of sealant to front windshield with cross hatch pattern.
Step 12
Let sealant sit for about 10 minutes.
Step 13
Buff hazy windshield with a lint free towel until it is clear.
All Done!
You've successfully completed Dual Detail's Spot Elimination process!
Not sure what services you need?
Take our Service Pilot